CNC Horizontal Heavy Roughing Machining Center HB Series
Siffofin
Nau'in Teburin Horizontal Machining Center
X/Z axis hanya ce ta madaidaiciyar hanya, Y axis hanya ce mai wuyar jagora.
Akwatin sandal ɗin tsari ne mai cikakken kayan aiki, tare da babban juzu'i.
High kudin yi, dace da m da Semi gama machining.
Motsin Rukunin Heavy Roughing Horizontal Machining Center
Tsarin ginshiƙi mai motsi.
Axis X/Z hanya ce ta madaidaiciyar hanya, Y axis an inganta shi zuwa tudun jagora, haɓaka ƙaƙƙarfan ginshiƙan Y-axis.
Haɓakawa na Gearbox, yankan ingancin ya inganta sosai.
Haɓaka zuwa sabon nau'in garkuwa.
An haɓaka saurin spindle zuwa 4500 rpm.
Nau'in Bene Horizontal Machining Center (na'ura mai nauyi mai nauyi)
Yanke mai nauyi da nauyi mai nauyi, kayan aiki mai kaifi don jujjuyawa da gamawa, mai dorewa.
Tsarin bene, babban ƙarfin ɗaukar nauyi.
Cikakken juyi juyi 10-3000, juzu'i na iya kaiwa fiye da 1000N.m.
Ram na iya mika 700mm don sarrafawa.
A kaifi kayan aiki don roughing da Semi-kammala molds mota. .
An ƙara karfin juzu'in motar ta 30-37kw, an haɓaka kayan aiki, an inganta tsarin tsiri, kuma an haɓaka ƙarfin yankewa sosai.
Ƙididdiga na Fasaha
| Abu | H B 1 7 1 2 ( Kayan aikinau'in) | H B 1 8 1 2 (Nau'in shafi mai motsi) | HB2516/HB3016/HB3020(Nau'in tsaye na bene) | |
| Kewayon sarrafawa | ||||
| X-axis tafiya | mm | 1700 (tebur na aiki yana motsawa hagu da dama) | 1800 (tebur na aiki yana motsawa hagu da dama) | 2500/3000/3000 (shafi yana matsawa hagu da dama) |
| Y-axis tafiya | mm | 1200 (akwatin spindle yana motsawa sama da ƙasa) | 1200 (akwatin spindle yana motsawa sama da ƙasa) | 1600/1600/2000 (akwatin spindle yana motsawa sama da ƙasa) |
| Z-axis tafiya | mm | 700 (aiki na aiki yana motsawa gaba da baya) | 800 (shafi yana matsawa gaba da baya) | 700 (Rago yana gaba da baya) |
| Spindle cibiyar zuwa tebur | mm | 0-1200 | 130-1330 | 100-1700/100-1700/100-2100 |
| Spindle ƙarshen fuska zuwa tsakiyar tebur | mm | 150-850 | 200-1000 | 200 |
| Nau'in dogo na jagora |
| Jagoran madaidaiciyar axis XZ/Y axis hard jagora | Jagoran madaidaiciyar axis XZ/Y axis hard jagora | |
| Kayan aiki | ||||
| Girman aiki | mm | 1700*850 | 1600*1000 | 2500*1550/3000*1550/3000*1550 |
| Kayan aiki mai aiki | kg | 5000 | 8000 | 30000 |
| Bayanan T-slot (nisa * tazara) | mm | 18*150 | 22*150 | 22*200 |
| Spindle | ||||
| Turiyanayin |
| Cikakken kayan aiki | Cikakken kayan aiki | Cikakken kayan aiki |
| Matsakaicin gudu | rpm | 3000 | 4500 | 3000 |
| Ƙarfin spinal | kW | 15/18.5 | 15/18.5 | 30/37 |
| Matsakaicin karfin juzu'i | Nm | 286/472 | 473/894 | 498/748 |
| Spindle taper/ ja fil |
| BT50-45 | BT50-45 | BT50-45 |
| Abincin tuƙi | ||||
| Matsakaicin saurin motsi X/Y/Z | m/min | 10/10/10 | 10/10/10 | 10/10/10 |
| Matsakaicin saurin yanke X/Y/Z | m/min. | 6/6/6 | 6/6/6 | 6/6/6 |
| Mafi ƙarancin ƙuduri | mm | 0.001 | 0.001 | 0.001 |
| Daidaito (mijin aiwatarwa GB/T19362.1-2003) | ||||
| X/Y/Z Daidaitaccen Matsayi | mm | 0.03 | 0.03 | 0.05 |
| Maimaituwar X/Y/Z | mm | 0.02 | 0.02 | 0.03 |
| Wasu | ||||
| CNC tsarin |
| FANUC Oi MF(5) | FANUC Oi MF(5) | FANUC Oi MF(1) |
| iko | kW | 60 | 60 | 75 |
| Tsayin inji | mm | 3300 | 3300 | 4200/4200/4700 |
| Wurin wawa (tsawon * nisa) | mm | 6600*4300 | 5600*4500 | 6000*4500/7000*4500/7000*4500 |
| Nauyin inji (kimanin.) | kg | 15000 | 20000 | 25T/28T/32T |
Gabatarwar Kanfigareshan
(1)FANUC 0i-MF(1)
Standard FANUC Oi-MF One CNC System, babban aiki aiki high aiki rate, high sauƙi na amfani.A lokaci guda, SIEMENS / Mitsubishi CNC tsarin za a iya zaba bisa ga bukatun.
(2)Kashi
BT50 spindle tare da babban gudun, high dace, high karfin juyi aiki halaye, don saduwa da aiki bukatun da dama na hali kayan.
(3)Mujallar kayan aiki
A misali 24T kayan aiki mujallar za a iya sanye take da 40 / 60T kayan aiki mujallar bisa ga ainihin aiki bukatun saduwa abokan ciniki' daban-daban yankan al'amura.
