Cibiyar Injin Kwance-kwance Biyar-Axis Jerin CP
Bidiyon Samfura
Tsarin Samfuri
Siffofi
Tsarin Mataki na X-axis
Bambancin tsayi na jirgin sama mai hawa na jagorar layi na X-axis
layin dogo yana tabbatar da cewa yanayin ƙarfin layin dogo na jagora yana da kyau.
Sukurori Mai Rami
Sanyayawar sukurori mai zurfi tana tabbatar da saurin gudu mai sauri
aikin injin don tabbatar da daidaito mai dorewa.
Babban Tauri Fuselage
Gadon da aka haɗa gaba da baya yana inganta taurin gadon tsakiyar injin cnc na kwance, ta haka ne
tabbatar da kwanciyar hankali na sarrafawa.
X, Y, Z Duk Jagororin Na'urar Layi Ne
X, Y, Z duk jagororin nadawa ne masu layi, saboda haka, daidaito mai girma
za a iya yankewa mai yawa.
Cibiyar injin CNC mai axis 5 ita ce axis X, Y, Z Jagorar Na'urar Naɗa Allinear
Don cimma daidaito mai kyau da juyawa mai nauyi, duk axis X, Y, da Z suna amfani da jagorar naɗa layi
45° axis ɗayaSresheHkawu
1. Tsarin kusurwar juyawa yana da girma, yana iya kasancewa a cikin -30°-180° juyawar kusurwar sarrafa kayan aikin, wanda ya dace da sarrafa sassan sararin samaniya.
2 Tsarin kan abin ɗaure hannu na A63 zai iya zamaya dace da sarrafa sassan mota masu haɗaka.
MotsawaCrossbeamStruck, Z-axisDmai ƙarfiSma'aikataMsamaSnan take
1 An yi gadon/shafi/katako da kayan ƙarfe masu launin toka, suna iya sha girgiza yadda ya kamata ta hanyarTsarin graphite, ƙaramin nakasa, ƙarfin tsari mai kyau da tauri.
An yi sassan motsi guda 2 da ƙarfe, don tabbatar da saurin motsi mai sauƙi da sauri (≥60m/min), ingantaccen aiki mai inganci.
bugun axis na 3 X/Y/Z (≥1700mm), ya dace da manyan sassan sarrafa
DaidaitoCfitilaTiya
Kayan aikin C shaft na na'urar CAM don kawar da sharewa, zuwatabbatar da cibiyar injin kwance ta CNC mai axis 5 mai inganci da inganci mai kyau
Sukurin Hollow
Sanyaya sukurori mai zurfi yana tabbatar da aiki mai sauri na injin don kiyaye daidaito mai kyau
P1 45°SingleAxisSresheHkawu
Tsarin tauri mai ƙarfi
Faɗin sarrafawa mai faɗi na iya rage maimaita matsawa na workpieces da inganta daidaito da inganci na aiki
Babban sauƙin daidaitawa, zaɓin axis biyu na duniya yana faɗaɗa aikin injin, wanda yayi daidai da ƙara axis na musamman. Ko da a cikin wasu manyan kayan aiki waɗanda ba su da sauƙin juyawa ko kuma sun yi nisa da buƙatun daidaito, ya fi dacewa fiye da ƙara axis na huɗu.
P2 Dmai ƙarfiSmai riƙewaHna gabashinSresheHkawu
Injin cire A-fitarwa yana tuƙi kai tsaye ta hanyar injin ƙaramin gudu mai ƙarfi, ba tare da cikas ba, daidaito mai girma, da kuma kyakkyawan aikin amsawa mai ƙarfi.
Man A yana amfani da maƙallan hydraulic, waɗanda ke da ƙarfin matsewa mai ƙarfi da tsawon rai. Ƙaramin siffa da aiki mai aminci
Na'urar iyakance kusurwa ta musamman ta sa sarrafa kan cibiyar injin CNC mai axis 5 ya fi sauƙi.
Babban tsauraran matakan lantarki, babban izinin ɗaukar kaya da kuma babban tauri.
LaserTruwaSettingIkayan aiki
Gano girman kayan aiki cikin sauri da daidaito don tabbatar da amfani na dogon lokaci ba tare da lalacewa ba
Akan layiDzaɓeStsarin
rage saitin kayan aikin cibiyar injin CNC da lokacin daidaitawa na kayan aiki, da kuma adana lokacin taimako 90%.
MaiMistGatheringStsarin
Babban purilabaran ƙaryaƙimar cation, aiki mai ƙarfi, hayaniya mai shirufloor.A cikin ingancifiA shafa hayakin iska mai narkewar ruwa da mai a cikin wurin aiki sannan a tsarkake iska sosai.
JuyawaFluidCyolingDjami'in 'yan sanda
Tsarin zai iya tabbatar da hauhawar zafin jiki na juyawaflyanayin zafi a cikin 3-5℃.
AxialGƙimaRuler
Siginar fitarwa da aka auna ita ce bugun dijital, wanda ke da halaye na babban kewayon ganowa, daidaiton ganowa mai girma da saurin amsawa da sauri.
Cibiyar Injin Kwance ta CNC mai axis biyar ta lalaceKayan aiki DzaɓeIn The Mujallar
An shigar da na'urar ganowa a cikin kayan aikinmujalla, kuma ana gudanar da tsarin ganowa da tsarin sarrafawa a lokaci guda, ba tare da shafar bugun sarrafawa ba.
Teburan Aiki
DaidaitacceRkundiStashar inngleWorkbench
Teburin juyawa tare da watsa cam na nadi
Ingantaccen aiki, babu koma baya, babu kulawa, babban tauri da nauyi mai yawa.
Teburin juyawa mai ƙaramin ma'aunin nuna bayanai na 0.001°
ZaɓiDmai ƙarfiEcanjin xchangeDmai ƙarfiStasharWorkbench
Haɗin da ke tsakanin jikin teburin aiki da kuma pallet ɗin yana da ƙarfi ta hanyar amfani da mazugi mai maki 4 ta amfani da ƙarfin matse pallet ɗin.
Ƙarfin matse teburin aiki yana kiyaye ingantaccen aiki don juyawa mai nauyi.
ATC
Ana iya amfani da shi don yin amfani da dogon sandar niƙa da kuma niƙa babban diamita don inganta yadda ake samar da shi.
Na'urar canza kayan aiki mai sauƙi amma mai aminci sosai ta hanyar cam drive
iya gane kayan aiki mai sauri da canzawa da kuma kwanciyar hankali na dogon lokaci
aiki wajen rage lokacin da ba a juyawa ba.
Bayanan Fasaha
| Aiki | Naúrar | CP800 | CP800T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 800x800x750 | 800x800x750 |
| Tafiyar axis na B | -30°-160° | -30°-160° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 290-1040 | 160-910 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 47-797 | -83-667 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -135-665 | -135-665 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | 108-908 | 108-908 | |
| Matsakaicin kewayon sarrafawa | mm | φ720*910 | φ720*910 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/60/60 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ650 | 500*500 | |
| Loda mai izini | kg | 500 | 500 | |
| Matsakaicin saurin juyawa | rmp | 40 | 40 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 60 | 60 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 190/Gina-ciki | 190/Gina-ciki |
| Dogon maƙalli | mm | A63 | A63 | |
| Matsakaicin gudun dogara sanda | r/min | 18000 | 18000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 30/35 | 30/35 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 72/85 | 72/85 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 7 | 7 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 80/150 | 80/150 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 8 | 8 | |
| Gjirgin ƙasa na uide | Layin jagora na X-axis (girman/adadin zamiya) | mm | 45/2 | 45/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 45/3 | 45/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 45/2 | 45/2 | |
| TWatsawa ta axis uku | Sukurin X-axis | N | 2R40x20 | 2R40x20 |
| Sukurin Y-axis | N | 2R40x20 | 2R40x20 | |
| Sukurin Z-axis | N | 2R40x20 | 2R40x20 | |
| Tdaidaiton axis uku | Daidaiton matsayi | mm | ±0.005/300 | ±0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | ±0.003/300 | ±0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 10.5 | 11 | |
| Aiki | Naúrar | CP1100 | CP1100T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 980x1140x680 | 980x1140x500 |
| Tafiyar axis na B | -30°-180° | -30°-180° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-780 | 100-600 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-680 | 0-500 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -260-720 | -260-720 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -160-820 | -160-820 | |
| Matsakaicin kewayon sarrafawa | mm | φ1120*780 | φ1120*600 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/60/60 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ800 | 630*630 | |
| Loda mai izini | kg | 1200 | 1000 | |
| Matsakaicin saurin juyawa | rmp | 30 | 30 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 50 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 230/Gina-ciki |
| Dogon maƙalli | mm | A100 | A100 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 10000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 54/65 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 200/230 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 8 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 120/240 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 15 | |
| Gjirgin ƙasa na uide | Layin jagora na X-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 55/3 | 55/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| TWatsawa ta axis uku | Sukurin X-axis | N | 2R50x20 | 2R50x20 |
| Sukurin Y-axis | N | 2R50x20 | 2R50x20 | |
| Sukurin Z-axis | N | 2R50x20 | 2R50x20 | |
| Tdaidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 23 | 24 | |
| Aiki | Naúrar | CP1600 | CP1600T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 1550x1540x1115 | 1550x1540x940 |
| Tafiyar axis na B | -30°-180° | -30°-180° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-1215 | 100-1040 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-1115 | 0-940 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -160-1290 | -160-1290 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -60-1390 | -60-1390 | |
| Matsakaicin kewayon sarrafawa | mm | φ1490*1215 | φ1490*1040 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 42/42/42 | 42/42/42 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ1200 | 800*800 | |
| Loda mai izini | kg | 2000 | 1800 | |
| Matsakaicin saurin juyawa | rmp | 20 | 20 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 50 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 230/Gina-ciki |
| Dogon maƙalli | mm | A100 | A100 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 10000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 54/65 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 200/230 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 8 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 120/240 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 15 | |
| Gjirgin ƙasa na uide | Layin jagora na X-axis (girman/adadin zamiya) | mm | 65/2 | 65/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 55/3 | 55/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| TWatsawa ta axis uku | Sukurin X-axis | N | 55x16 | 55x16 |
| Sukurin Y-axis | N | 55x16 | 55x16 | |
| Sukurin Z-axis | N | 2R50x20 | 2R50x20 | |
| Tdaidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 30 | 31 | |
| Aiki | Naúrar | CP2000 | CPCP2000V2V | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 2000x1700x1400 | 1700x1750x1700 |
| Tafiyar axis na B | -30°-180° | -30°-160° | ||
| Tafiyar C axis | 360° | 0-360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-1500 | -43-1657 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-1400 | 200-1900 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -1000-1000 | -57-1643 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -900-1100 | -300-1400 | |
| Matsakaicin kewayon sarrafawa | mm | φ1680*1500 | φ1700*1900 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/90/90 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 1 | |
| Diamita na faifai | mm | φ1600 | 800*800 | |
| Loda mai izini | kg | 3000 | 1500 | |
| Matsakaicin saurin juyawa | rmp | 20 | 60 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 10/6 | 8/4 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 60 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 190/Gina-ciki |
| Dogon maƙalli | mm | A100 | A63 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 18000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 30/35 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 70/85 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 7 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 80/150 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 8 | |
| Gjirgin ƙasa na uide | Layin jagora na X-axis (girman/adadin zamiya) | mm | 55/3 | 55/3 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 45/3 | 45/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| TWatsawa ta axis uku | Sukurin X-axis | N | 63×25 | 63×25 |
| Sukurin Y-axis | N | 50×25 | 50×32 | |
| Sukurin Z-axis | N | 50*25*2 | 50*32*2 | |
| Tdaidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 42 | 42 | |
Tsarin Mataki na X-axis
Bambancin tsayi na jirgin sama mai hawa na jagorar layi na X-axis
layin dogo yana tabbatar da cewa yanayin ƙarfin layin dogo na jagora yana da kyau.
Sukurori Mai Rami
Sanyayawar sukurori mai zurfi tana tabbatar da saurin gudu mai sauri
aikin injin don tabbatar da daidaito mai dorewa.
Babban Tauri Fuselage
Gadon da aka haɗa gaba da baya yana inganta taurin gadon kayan aikin injin, ta haka ne
tabbatar da kwanciyar hankali na sarrafawa.
X, Y, Z Duk Jagororin Na'urar Layi Ne
X, Y, Z duk jagororin nadawa ne masu layi, saboda haka, daidaito mai girma
za a iya yankewa mai yawa.
X,Y,Z gatariAsakeAlinearRollerGuide
Domin cimma daidaito mai kyau da yankewa mai nauyi, duk axis X, Y, da Z suna amfani da jagorar naɗa layi
45° axis ɗayaSresheHkawu
1. Tsarin kusurwar juyawa yana da girma, yana iya kasancewa a cikin -30°-180° juyawar kusurwar sarrafa kayan aikin, wanda ya dace da sarrafa sassan sararin samaniya.
2 Tsarin kan abin ɗaure hannu na A63 zai iya zama
ya dace da sarrafa sassan mota masu haɗaka.
MotsawaCrossbeamStruck, Z-axisDmai ƙarfiSma'aikataMsamaSnan take
1 An yi gadon/shafi/katako da kayan ƙarfe masu launin toka, suna iya shan girgiza ta hanyar tsarin graphite, ƙaramin nakasa, ƙarfin tsari mai kyau da tauri.
An yi sassan motsi guda 2 da ƙarfe, don tabbatar da sauƙin motsi, saurin motsi mai sauri (≥60m/min), kuma ingantaccen aiki mai inganci.
3 X/Y/Z axis stroke (≥1700mm), ya dace da manyan sassa sarrafa
PrecislonCfitilaTiya
C shaft roller gear CAM don kawar da sharewa, don tabbatar da ingantaccen aiki da ingantaccen aiki
Sukurin Hollow
Sanyin da ke cikin sukurori mai zurfi yana tabbatar da aiki mai sauri na injin don kiyaye daidaito mai kyau
P145°SingleAxisSresheHkawu
Tsarin tauri mai ƙarfi
Faɗin sarrafawa mai faɗi na iya rage maimaita matsawa na workpieces da inganta daidaito da inganci na aiki
Babban sauƙin daidaitawa, zaɓin axis biyu na duniya yana faɗaɗa aikin injin, wanda yayi daidai da ƙara axis na musamman. Ko da a cikin wasu manyan kayan aiki waɗanda ba su da sauƙin juyawa ko kuma sun yi nisa da buƙatun daidaito, ya fi dacewa fiye da ƙara axis na huɗu.
P2Dmai ƙarfiSmai riƙewaHna gabashinSresheHkawu
Injin cire A-fitarwa yana tuƙi kai tsaye ta hanyar injin ƙaramin gudu mai ƙarfi, ba tare da cikas ba, daidaito mai girma, da kuma kyakkyawan aikin amsawa mai ƙarfi.
Man A yana amfani da maƙallan hydraulic, waɗanda ke da ƙarfin matsewa mai ƙarfi da tsawon rai. Ƙaramin siffa da aiki mai aminci
Na'urar iyakance kusurwa ta musamman tana sauƙaƙa sarrafa kai.
Babban tsauraran matakan lantarki, babban izinin ɗaukar kaya da kuma babban tauri.
P345°SingleAxisSresheHkawu
Tsarin tauri mai ƙarfi
Faɗin sarrafawa mai faɗi na iya rage maimaita matsawa na workpieces da inganta daidaito da inganci na aiki
Babban sauƙin daidaitawa, zaɓin axis biyu na duniya yana faɗaɗa aikin injin, wanda yayi daidai da ƙara axis na musamman. Ko da a cikin wasu manyan kayan aiki waɗanda ba su da sauƙin juyawa ko kuma sun yi nisa da buƙatun daidaito, ya fi dacewa fiye da ƙara axis na huɗu.
P4 Dmai ƙarfiSmai riƙewaHna gabashinSresheHkawu
Injin cire A-fitarwa yana tuƙi kai tsaye ta hanyar injin ƙaramin gudu mai ƙarfi, ba tare da cikas ba, daidaito mai girma, da kuma kyakkyawan aikin amsawa mai ƙarfi.
Man A yana amfani da maƙallan hydraulic, waɗanda ke da ƙarfin matsewa mai ƙarfi da tsawon rai. Ƙaramin siffa da aiki mai aminci
Na'urar iyakance kusurwa ta musamman tana sauƙaƙa sarrafa kai.
Babban tsauraran matakan lantarki, babban izinin ɗaukar kaya da kuma babban tauri.
LaserTruwaSettingIkayan aiki
Gano girman kayan aiki cikin sauri da daidaito don tabbatar da amfani na dogon lokaci ba tare da lalacewa ba
Akan layiDzaɓeStsarin
rage saitin kayan aiki da lokacin daidaitawa na kayan aiki, da kuma adana 90% na lokacin taimako.
MaiMistGatheringStsarin
Babban adadin tsarkakewa, aiki mai dorewa, ƙasa mai hayaniya. Tace hayakin iska mai narkewa cikin ruwa da mai da iskar da ke cikin wurin aiki da kuma tsarkake iska sosai.
YankanFluidCyolingDjami'in 'yan sanda
Tsarin zai iya tabbatar da hauhawar zafin jiki na ruwan yankewa a cikin 3-5℃.
AxialGƙimaRuler
Siginar fitarwa da aka auna ita ce bugun dijital, wanda ke da halaye na babban kewayon ganowa, daidaiton ganowa mai girma da saurin amsawa da sauri.
KaryewaKayan aiki DzaɓeInTshiMujallar
An shigar da na'urar ganowa a cikin mujallar kayan aiki, kuma ana gudanar da tsarin ganowa da tsarin sarrafawa a lokaci guda, ba tare da shafar bugun sarrafawa ba.
Teburan Aiki
DaidaitacceRkundiStashar inngleWorkbench
Teburin juyawa tare da watsa cam na nadi
Ingantaccen aiki, babu koma baya, babu kulawa, babban tauri da nauyi mai yawa.
Teburin juyawa mai ƙaramin ma'aunin nuna bayanai na 0.001°
ZaɓiDmai ƙarfiEcanjin xchangeDmai ƙarfiStasharWorkbench
Haɗin da ke tsakanin jikin teburin aiki da kuma pallet ɗin yana da ƙarfi ta hanyar amfani da mazugi mai maki 4 ta amfani da ƙarfin matse pallet ɗin.
Ƙarfin matse teburin aiki yana kula da ingantaccen aiki don yankewa mai nauyi.
ATC
Ana iya amfani da shi don yin amfani da dogon sandar niƙa da kuma niƙa babban diamita don inganta yadda ake samar da shi.
Na'urar canza kayan aiki mai sauƙi amma mai aminci sosai ta hanyar cam drive
iya gane kayan aiki mai sauri da canzawa da kuma kwanciyar hankali na dogon lokaci
aiki wajen rage lokacin yankewa.
| Aiki | Naúrar | CP800 | CP800T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 800x800x750 | 800x800x750 |
| Tafiyar axis na B | -30°-160° | -30°-160° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 290-1040 | 160-910 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 47-797 | -83-667 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -135-665 | -135-665 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | 108-908 | 108-908 | |
| Matsakaicin kewayon sarrafawa | mm | φ720*910 | φ720*910 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/60/60 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ650 | 500*500 | |
| Loda mai izini | kg | 500 | 500 | |
| Matsakaicin saurin juyawa | rmp | 40 | 40 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 60 | 60 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 190/Gina-ciki | 190/Gina-ciki |
| Dogon maƙalli | mm | A63 | A63 | |
| Matsakaicin gudun dogara sanda | r/min | 18000 | 18000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 30/35 | 30/35 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 72/85 | 72/85 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 7 | 7 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 80/150 | 80/150 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 8 | 8 | |
| Layin jagora | Layin jagora na X-axis (girman/adadin zamiya) | mm | 45/2 | 45/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 45/3 | 45/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 45/2 | 45/2 | |
| Watsawa ta axis uku | Sukurin X-axis | N | 2R40x20 | 2R40x20 |
| Sukurin Y-axis | N | 2R40x20 | 2R40x20 | |
| Sukurin Z-axis | N | 2R40x20 | 2R40x20 | |
| Daidaiton axis uku | Daidaiton matsayi | mm | ±0.005/300 | ±0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | ±0.003/300 | ±0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 10.5 | 11 | |
| Aiki | Naúrar | CP1100 | CP1100T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 980x1140x680 | 980x1140x500 |
| Tafiyar axis na B | -30°-180° | -30°-180° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-780 | 100-600 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-680 | 0-500 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -260-720 | -260-720 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -160-820 | -160-820 | |
| Matsakaicin kewayon sarrafawa | mm | φ1120*780 | φ1120*600 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/60/60 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ800 | 630*630 | |
| Loda mai izini | kg | 1200 | 1000 | |
| Matsakaicin saurin juyawa | rmp | 30 | 30 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 50 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 230/Gina-ciki |
| Dogon maƙalli | mm | A100 | A100 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 10000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 54/65 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 200/230 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 8 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 120/240 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 15 | |
| Layin jagora | Layin jagora na X-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 55/3 | 55/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| Watsawa ta axis uku | Sukurin X-axis | N | 2R50x20 | 2R50x20 |
| Sukurin Y-axis | N | 2R50x20 | 2R50x20 | |
| Sukurin Z-axis | N | 2R50x20 | 2R50x20 | |
| Daidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 23 | 24 | |
| Aiki | Naúrar | CP1600 | CP1600T2 | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 1550x1540x1115 | 1550x1540x940 |
| Tafiyar axis na B | -30°-180° | -30°-180° | ||
| Tafiyar C axis | 360° | 360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-1215 | 100-1040 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-1115 | 0-940 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -160-1290 | -160-1290 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -60-1390 | -60-1390 | |
| Matsakaicin kewayon sarrafawa | mm | φ1490*1215 | φ1490*1040 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 42/42/42 | 42/42/42 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 2 | |
| Diamita na faifai | mm | φ1200 | 800*800 | |
| Loda mai izini | kg | 2000 | 1800 | |
| Matsakaicin saurin juyawa | rmp | 20 | 20 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 15/10 | 15/10 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 50 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 230/Gina-ciki |
| Dogon maƙalli | mm | A100 | A100 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 10000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 54/65 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 200/230 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 8 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 120/240 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 15 | |
| Layin jagora | Layin jagora na X-axis (girman/adadin zamiya) | mm | 65/2 | 65/2 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 55/3 | 55/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| Watsawa ta axis uku | Sukurin X-axis | N | 55×16 | 55×16 |
| Sukurin Y-axis | N | 55×16 | 55×16 | |
| Sukurin Z-axis | N | 2R50x20 | 2R50x20 | |
| Daidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 30 | 31 | |
| Aiki | Naúrar | CP2000 | CPCP2000V2V | |
| Tafiya | Tafiyar axis ta X/Y/Z | mm | 2000x1700x1400 | 1700x1750x1700 |
| Tafiyar axis na B | -30°-180° | -30°-160° | ||
| Tafiyar C axis | 360° | 0-360° | ||
| Nisa daga madauri zuwa saman tebur (axis B digiri 90 a kwance) | mm | 100-1500 | -43-1657 | |
| Nisa daga madauri zuwa saman tebur (axis B digiri 0 a tsaye) | mm | 0-1400 | 200-1900 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 90 a kwance) | mm | -1000-1000 | -57-1643 | |
| Nisa daga madauri zuwa tsakiyar tebur (axis B digiri 0 a tsaye) | mm | -900-1100 | -300-1400 | |
| Matsakaicin kewayon sarrafawa | mm | φ1680*1500 | φ1700*1900 | |
| Ciyar da axis uku | Saurin sauyawa cikin sauri axis na X/Y/Z | m/min | 60/60/60 | 60/90/90 |
| Yanke saurin ciyarwa | mm/min | 0-24000 | 0-24000 | |
| Teburin juyawa (axis na C) | Adadin tebura masu aiki | 1 | 1 | |
| Diamita na faifai | mm | φ1600 | 800*800 | |
| Loda mai izini | kg | 3000 | 1500 | |
| Matsakaicin saurin juyawa | rmp | 20 | 60 | |
| Daidaiton matsayi/maimaitawa | arc.sec | 10/6 | 8/4 | |
| Axis na B | Matsakaicin saurin juyawa | rmp | 50 | 60 |
| Daidaiton matsayi/maimaitawa | arc.sec | 8/4 | 8/4 | |
| Dogayen sanda | Bayanan ƙa'idodin juyawa (diamita na shigarwa/yanayin watsawa) | mm | 230/Gina-ciki | 190/Gina-ciki |
| Dogon maƙalli | mm | A100 | A63 | |
| Matsakaicin gudun dogara sanda | r/min | 10000 | 18000 | |
| Ƙarfin injin spindle (ci gaba/S640%) | kW | 54/65 | 30/35 | |
| Ƙarfin injin juyawa (ci gaba/S640%) | Nm | 200/230 | 70/85 | |
| Mujallar Kayan Aiki | Ikon mujallun kayan aiki | 50T | 50T | |
| Lokacin canza kayan aiki (TT) | S | 8 | 7 | |
| Matsakaicin diamita na kayan aiki (cikakken kayan aiki/kayan aiki mara komai) | mm | 120/240 | 80/150 | |
| Tsawon kayan aiki mafi girma | Mm | 450 | 450 | |
| Matsakaicin nauyin kayan aiki | kg | 15 | 8 | |
| Layin jagora | Layin jagora na X-axis (girman/adadin zamiya) | mm | 55/3 | 55/3 |
| Layin jagora na axis na Y (girman/adadin zamiya) | mm | 45/3 | 45/3 | |
| Layin jagora na Z-axis (girman/adadin zamiya) | mm | 55/2 | 55/2 | |
| Watsawa ta axis uku | Sukurin X-axis | N | 63×25 | 63×25 |
| Sukurin Y-axis | N | 50×25 | 50×32 | |
| Sukurin Z-axis | N | 50*25*2 | 50*32*2 | |
| Daidaiton axis uku | Daidaiton matsayi | mm | 0.005/300 | 0.005/300 |
| Daidaiton matsayi mai maimaitawa | mm | 0.003/300 | 0.003/300 | |
| Tsarin shafawa | Ƙarfin na'urar mai | L | 0.7 | 0.7 |
| Nau'in mai | Man shafawa mai | Man shafawa mai | ||
| Wani | Bukatun iska | kg/cm² | ≥6 | ≥6 |
| Gudun tushen iska | mm³/min | ≥0.5 | ≥0.5 | |
| Nauyin injin | KG | 42 | 42 | |
Nau'ikan samfura
-
Cibiyar Injin CNC ta VC Series High Rigidity da ...
-
Jagorar Layi ta Hanyar Motsawa ta HP Series...
-
Jagorar Layi ta Juyawa ta HT Series...
-
VS Series Hudu Mai Nauyi Na CNC Machining C ...
-
Cibiyar Injin CNC ta V Series tare da Babban Tauri
-
Cibiyar Injin CNC Mai Zane Biyu Mai Layi X Series
-
Cibiyar Injin CNC Mai Axis 5 a Kwance TKG1600
-
CNC Tsaye Juyawa da Niƙa Haɗaɗɗen Cent...
-
Cibiyar Injin CNC Mai Sauri Mai Sauri GM Series
-
Babban Sauri CNC Niƙa GT Series
-
Lathe CNC mai sassa biyu SK32
-
Cibiyar Injin CNC Tsaye RFTV510 Don Taya...